ZyXEL Communications ZyWALL USG 300 User Manual page 985

Table 296 Built-in Services Logs (continued)
LOG MESSAGE
Wizard apply DNS
server failed.
Wizard adds DNS server
%s failed because DNS
zone setting has
conflictd.
Wizard adds DNS server
%s failed because Zone
Forwarder numbers have
reached the maximum
number of 32.
Access control rules
of %s have reached the
maximum number of %u
Access control rule %u
of %s was appended.
Access control rule %u
of %s was inserted.
Access control rule %u
of %s was modified.
Access control rule %u
of %s was deleted.
Access control rule %d
of %s was moved to %d.
SNMP trap can not be
sent successfully
Table 297 System Logs
LOG MESSAGE
Port %d is up!!
Port %d is down!!
ZyWALL USG 300 User's Guide
DESCRIPTION
Wizard apply DNS server failed.
Wizard apply DNS server failed because DNS zone conflicted.
%s is the IP address of the DNS server
Wizard apply DNS server fail because the device already has
the maximum number of DNS records configured.
%s is IP address of the DNS server.
The maximum number of allowable rules has been reached.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
%u is the maximum number of access control rules.
A new built-in service access control rule was appended.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was inserted successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was modified successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was removed successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was moved successfully.
1st %d is the previous index .
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
2nd %d is current previous index.
Cannot send a SNMP trap to a remote host due to network
error
DESCRIPTION
When LINK is up, %d is the port number.
When LINK is down, %d is the port number.
Appendix A Log Descriptions
985