Group Add/Edit Screen - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 40 User/Group
Table 197 Configuration > Object > User/Group > Group (continued)
LABEL
#
Group Name
Description
Member

40.3.1 Group Add/Edit Screen

The Group Add/Edit screen allows you to create a new user group or edit an
existing one. To access this screen, go to the Group screen (see
page 729), and click either the Add icon or an Edit icon.
Figure 489 Configuration > User/Group > Group > Add
The following table describes the labels in this screen.
Table 198 Configuration > User/Group > Group > Add
LABEL
Name
Description
730
DESCRIPTION
This field is a sequential value, and it is not associated with a specific
user group.
This field displays the name of each user group.
This field displays the description for each user group.
This field lists the members in the user group. Each member is separated
by a comma.
DESCRIPTION
Type the name for this user group. You may use 1-31 alphanumeric
characters, underscores(
be a number. This value is case-sensitive. User group names have to be
different than user names.
Enter the description of the user group, if any. You can use up to 60
characters, punctuation marks, and spaces.
), or dashes (-), but the first character cannot
_
ZyWALL USG 300 User's Guide
Section 40.3 on