Edit System Log Settings - ZyXEL Communications ZyWALL USG 300 User Manual

The following table describes the labels in this screen.
Table 256 Configuration > Log & Report > Log Setting
LABEL
Edit
Activate
Inactivate
#
Name
Log Format
Summary
Active Log
Summary
Apply

51.3.2 Edit System Log Settings

The Log Settings Edit screen controls the detailed settings for each log in the
system log (which includes the e-mail profiles). Go to the Log Settings
Summary screen (see
icon.
ZyWALL USG 300 User's Guide
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific
log.
This field displays the type of log setting entry (system log, logs stored
on a USB storage device connected to the ZyWALL, or one of the remote
servers).
This field displays the format of the log.
Internal - system log; you can view the log on the View Log tab.
VRPT/Syslog - ZyXEL's Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
This field is a summary of the settings for each log. Please see
51.3.2 on page 871 for more information.
Click this button to open the Active Log Summary Edit screen.
Click this button to save your changes (activate and deactivate logs) and
make them take effect.
Section 51.3.1 on page
Chapter 51 Log and Report
870), and click the system log Edit
Section
871