Reboot; Chapter 55 Reboot; Overview; What You Need To Know - ZyXEL Communications ZyWALL USG 300 User Manual

C
H A P T E R

55.1 Overview

Use this to restart the device (for example, if the device begins behaving
erratically). See also
start and stop the ZyWALL.

55.1.1 What You Need To Know

If you applied changes in the Web configurator, these were saved automatically
and do not change when you reboot. If you made changes in the CLI, however,
you have to use the write command to save the configuration before you reboot.
Otherwise, the changes are lost when you reboot.
Reboot is different to reset; (see
device to its default configuration.

55.2 The Reboot Screen

The Reboot screen is part of the Web configurator so that remote users can
restart the device. To access this screen, click Maintenance > Reboot.
Figure 618 Maintenance > Reboot
Click the Reboot button to restart the ZyWALL. Wait a few minutes until the login
screen appears. If the login screen does not appear, type the IP address of the
device in your Web browser.
You can also use the CLI command reboot to restart the ZyWALL.
ZyWALL USG 300 User's Guide
Section 1.5 on page 37
Section 57.1 on page
55

Reboot

for information on different ways to
939) reset returns the
917