ZyXEL Communications ZyWALL USG 300 User Manual page 1003

Table 303 Interface Logs (continued)
LOG MESSAGE
Interface %s connect
failed: Connect to
server failed.
Interface %s
connection
terminated.
Interface %s
connection
terminated: idle
timeout.
Interface %s connect
failed: MS-CHAPv2
mutual authentication
failed.
Interface %s connect
failed: MS-CHAP
authentication
failed.
Interface %s connect
failed: CHAP
authentication
failed.
Interface %s is
connected.
Interface %s is
disconnected.
Interface %s connect
failed: Peer not
responding.
Interface %s connect
failed: PAP
authentication
failed.
Interface %s connect
failed: Connect
timeout.
Interface %s create
failed because has no
member.
"Interface cellular
Application Error Code
%d\n.
"An error [%d]
occurred while
negotiating with the
device in %s. Please
try to remove then
insert the device.
ZyWALL USG 300 User's Guide
DESCRIPTION
A PPTP interface failed to connect to the PPTP server. %s:
interface name.
A PPP or AUX connection will terminate. %s: interface name.
An idle PPP or AUX connection timed out.1%s: interface
name.
MS-CHAPv2 authentication failed (the server must support
mS-CHAPv2 and verify that the authentication failed, this
does not include cases where the servers does not support
MS-CHAPv2). %s: interface name.
MS-CHAP authentication failed (the server must support MS-
CHAP and verify that the authentication failed, this does not
include cases where the server does not support MS-CHAP).
%s: interface name.
CHAP authentication failed (the server must support CHAP
and verify that the authentication failed, this does not include
cases where the server does not support CHAP). CHAP:
interface name.
A PPP or AUX interface connected successfully. %s: interface
name.
A PPP or AUX interface disconnected successfully. %s:
interface name.
The interface's connection will be terminated because the
server did not send any LCP packets. %s: interface name.
PAP authentication failed (the server must support PAP and
verify verify that the authentication failed, this does not
include cases where the server does not support PAP). %s:
PPP interface name.
A PPPOE connection timed out due to a lack of response from
the PPPOE server. %s: PPP interface name.
A bridge interface has no member. %s: bridge interface
name.
The listed error code (%d) was generated due to an internal
cellular interface error.
The listed error code (%d) happened when the ZyWALL
attempted to negotiate with the cellular device installed in (or
connected to) the listed slot (%s). Remove and reinstall the
device.
Appendix A Log Descriptions
1003