ZyXEL Communications ZyWALL USG 300 User Manual page 1001

CODE DESCRIPTION
CRL is too old.
15
CRL is not valid.
16
CRL signature was not verified correctly.
17
CRL was not found (anywhere).
18
CRL was not added to the cache.
19
CRL decoding failed.
20
CRL is not currently valid, but in the future.
21
CRL contains duplicate serial numbers.
22
Time interval is not continuous.
23
Time information not available.
24
Database method failed due to timeout.
25
Database method failed.
26
Path was not verified.
27
Maximum path length reached.
28
Table 303 Interface Logs
LOG MESSAGE
Interface %s has been
deleted.
AUX Interface dialing
failed. This AUX
interface is not
enabled.
AUX Interface
disconnecting failed.
This AUX interface is
not enabled.
Please type phone
number of interface
AUX first then dial
again.
Please type phone
number of Interface
AUX first then
disconnect again.
Interface %s will
reapply because Device
HA become active
status.
Interface %s will
reapply because Device
HA is not running.
ZyWALL USG 300 User's Guide
DESCRIPTION
An administrator deleted an interface. %s is the interface
name.
A user tried to dial the AUX interface, but the AUX interface is
not enabled.
The AUX interface is not enabled and a user tried to use the
disconnect aux command.
A user tried to dial the AUX interface, but the AUX interface
does not have a phone number set.
The AUX interface does not have a phone number set and a
user tried to use the disconnect aux command.
Device-ha became active and is using a PPP base interface,
the PPP interface must reapply, %s is the interface name.
Device-ha was deleted and free PPP base interface, PPP
interface must reapply, %s is the interface name.
Appendix A Log Descriptions
1001