ZyXEL Communications ZyWALL USG 300 User Manual page 764

Chapter 44 AAA Server
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS
screen.
Figure 511 Configuration > Object > AAA Server > RADIUS
The following table describes the labels in this screen.
Table 216 Configuration > Object > AAA Server > RADIUS
LABEL
Add
Edit
Remove
Object
References
#
Name
Server
Address
Base DN
Host
Authentication
Port
Key
Timeout
Apply
Reset
764
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
an example.
This field displays the index number.
This is the name of the RADIUS server entry.
This is the address of the AD or LDAP server.
This specifies a directory. For example,
Enter the IP address (in dotted decimal notation) or the domain name (up
to 63 alphanumeric characters) of a RADIUS server.
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator
instructs you to do so with additional information.
Enter a password (up to 15 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on the
external authentication server and the ZyWALL.
Specify the timeout period (between 1 and 300 seconds) before the
ZyWALL disconnects from the RADIUS server. In this case, user
authentication fails.
Search timeout occurs when either the user information is not in the
RADIUS server or the RADIUS server is down.
Click Apply to save the changes.
Click Reset to return the screen to its last-saved settings.
Section 13.3.2 on page 309
.
o=ZyXEL, c=US
ZyWALL USG 300 User's Guide
for