ZyXEL Communications ZyWALL USG 300 User Manual page 997

Table 300 Routing Protocol Logs (continued)
LOG MESSAGE
Invalid OSPF %s
authentication of area
%s.
Invalid OSPF virtual-
link %d md5
authentication of area
%s.
Invalid OSPF virtual-
link %s text
authentication of area
%s.
Invalid OSPF virtual-
link %s authentication
of area %s.
Invalid OSPF md5
authentication on
interface %s.
Invalid OSPF text
authentication on
interface %s.
Interface %s does not
belong to any OSPF
area.
Invalid OSPF
authentication of area
%s on interface %s.
Table 301 NAT Logs
LOG MESSAGE
The NAT range is full
%s FTP ALG has
succeeded.
Extra signal port of
FTP ALG has been
modified.
Signal port of FTP ALG
has been modified.
%s H.323 ALG has
succeeded.
Extra signal port of
H.323 ALG has been
modified.
Signal port of H.323
ALG has been modified.
ZyWALL USG 300 User's Guide
DESCRIPTION
OSPF md5 or text authentication has been set without setting
md5 authentication id and key, or text authentication key
first.
Virtual-link %s md5 authentication has been set without
setting md5 authentication id and key first. %s: Virtual-Link
ID
Virtual-link %s text authentication has been set without
setting text authentication key first. %s: Virtual-Link ID
Virtual-link %s authentication has been set to same-as-area
but the area has invalid authentication configuration. %s:
Virtual-Link ID
Invalid OSPF md5 authentication is set on interface %s. %s:
Interface Name
Invalid OSPF text authentication is set on interface %s. %s:
Interface Name
Interface %s has been set OSPF authentication same-as-
area, however the interface does not belong to any OSPF
area. %s: Interface Name
Interface %s has been set OSPF authentication same-as-
area, however the area has invalid text authentication
configuration. %s: Interface Name
DESCRIPTION
The NAT mapping table is full.
The FTP Application Layer Gateway (ALG) has been turned on
or off.
%s: Enable or Disable
Extra FTP ALG port has been changed.
Default FTP ALG port has been changed.
The H.323 ALG has been turned on or off. %s: Enable or
Disable
Extra H.323 ALG port has been changed.
Default H.323 ALG port has been changed.
Appendix A Log Descriptions
997