Completing The Installation Administration; Verifying Translations - Avaya S8710 Installing And Configuring

5
Completing the installation
administration
This section covers the following tasks:
•

Verifying translations

•
Setting daylight savings time rules
•
Setting locations (if necessary)
•
Verifying date and time
•
Resolving alarms
•
Enabling and disabling Ethernet switch ports
•
Backing up files to the compact flash media (S8710 only)
•
Backing up files to the PCMCIA flashcard (S8700 only)
•
Telneting to media server
•
Enabling alarms
•
Registering the system
Verifying translations
1
Type
list configuration all
system.
2
Type list ipsi
3
Check the administration status on the following items:
•
list station
•
list trunk-group
•
list hunt-group
NOTE:
Even though you set the date, time, and time zone through the Web interface on the media
server, you also must set the daylight savings time rules and locations and verify the date
and time through SAT commands.
Installing and Configuring the Avaya S8700 or S8710 Media Server
June 2004
on page 57
on page 58
on page 59
on page 59
on page 60
on page 65
on page 65
on page 66
and press Enter to view all the administered circuit packs in the
and press Enter to verify the location of the IPSI circuit packs.

Completing the installation administration

on page 60
on page 61
on page 63
5
Verifying translations
57