Verifying License Status; Reusing A Tn2312Ap/Bp Circuit Pack - Avaya S8710 Installing And Configuring

4 Connecting to the IPSIs

Verifying license status

1
Type
change system-parameters ipserver-interface
SERVER INFORMATION
Primary Control Subnet Address: 172. 22.
Secondary Control Subnet Address:
OPTIONS
IPSI Control of Port Networks: enabled
2
Make sure the
3
Press Enter to effect the changes.
Verifying license status
1
Under Security, click License File and verify that the license mode is now normal.

Reusing a TN2312AP/BP circuit pack

On occasion a customer may want to reuse a TN2312AP or TN2312BP circuit pack that was previously
programmed for DHCP or static addressing. You must erase the existing programming before
reprogramming it. Failure to do this may result in serious network problems.
For information on erasing the programming, go to the Maintenance Procedures for Avaya
Communication Manager 2.1, Media Gateways and Servers (03-300192).
56
change system-parameters ipserver-interface
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
IPSI Host Name Prefix:
Switch Identifier: A
IPSI Control of Port Networks:
Installing and Configuring the Avaya S8700 or S8710 Media Server
and press Enter.
Page
0. 0
. . .
field is set to enabled.
1 of 1
June 2004