View All the WAN Connections Configured
on the Router
If your ProCurve Secure Router is providing several WAN connections for your
company, you may want to view a list of these connections. The show
connections command provides a quick view of all the connections on the
router. As Figure 5-9 shows, this command lists the logical interface and the
physical interface for each connection.
You enter the show connections command from the enable mode context.
ProCurveSR7203dl#show connections
Displaying all connections...
Conn Id
From
-----------------------------------------------------------
1
ppp 1
2
fr 1
3
fr 2
Figure 5-9. show connections Command
Configuring Serial Interfaces for E1- and T1-Carrier Lines
Viewing Information about the Serial Interface
To
t1 1/1, tdm-group 1
t1 3/1, tdm-group 1
ser 2/1
Serial interface with Frame
Relay as the Data Link
Layer protocol
5-17