HP ProCurve 7000dl Series Basic Management And Configuration Manual page 199

N o t e
You can initiate an outbound Telnet session from both the basic and enable
mode context. You simply enter telnet <A.B.C.D>, replacing <A.B.C.D> with
the IP address of the device that you want to access.
From the global configuration mode context, enter:
Syntax: aaa accounting [exec | connection] [default | <named list>] [none |
start-stop | stop-only] [group {tacacs+ | <groupname>}]
Specify the exec option to send records of all new connections, or specify
the connection option to send records for outbound Telnet connections.
Specify the default accounting list, or replace <named list> to create an
accounting list.
Include the start-stop option if you want an accounting record to be
generated both when the user begins and ends his or her session. Include
the stop-only option if you want an accounting record to be generated
only when the user ends his or her session. Include the none option if you
do not want an accounting record generated. If you specify the none
option, you cannot include the group option (because a TACACS+ server
is not required).
Include the group tacacs+ option if you want the ProCurve Secure Router
to send the accounting information to the default group of TACACS+
servers. Replace group <groupname> with a group of TACACS+ servers
that you created. You can specify more than one group.
3. Assign the named list to the appropriate line configuration mode context.
• If you have created a named list to track the users who access the
basic or enable mode context, enter:
Syntax: accounting commands [1 | 15] [default | <named list>]
Specify the level of commands for which you want to generate
accounting: 1 is unprivileged access, which is the basic mode, and 15
is privileged access, which is the enable mode.
Specify the default accounting list, or replace <named list> to create
an accounting list.
Controlling Management Access to the ProCurve Secure Router
Quick Start
2-75