Assigning A Fixed Dhcp Address To A Single Host - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Assigning a Fixed DHCP Address to a Single Host

If you so choose, you can print and fill out Table 13-3 and refer to it while
configuring the pool for the single host.
Table 13-3. Settings for Assigning a Host a Fixed Address
Configuration
host DHCP Pool
servers
other configurations
1. Move to the global configuration mode context and create a DHCP client
pool for the host.
Syntax: ip dhcp-server pool <poolname>
2. Identify the host by its MAC address.
Syntax: hardware-address <MAC address>
For example:
ProCurve(config-dhcp)# hardware-address d2:17:04:91:11:50
Dynamic Host Configuration Protocol (DHCP)
Parameter
pool name
host MAC address
fixed IP address
default gateway IP address
primary DNS server
secondary DNS server
primary WINS (NetBIOS)
server
TFTP server
NTP server
lease in days, hours, and
minutes
client name
domain name
timezone offset
Quick Start
Your Setting
13-37