Show - HP ProCurve 7000dl Series Basic Management And Configuration Manual

N o t e
Option
show arp [realtime]
show autosynch-status
show clock
show demand
show dynamic-dns
show event-history
show frame-relay [fragment | lmi | multilink | pvc]
show interfaces [<interface ID> {performance-statistics |
realtime}]
show ip access-list [<name>]
show ip interfaces [demand | ethernet | frame-relay | hdlc |
loopback | ppp | tunnel]
If you enter for the verbose option in the extended commands, the output
y
reports the result of each ping with a description of the datagram size and the
echo's round-trip time. For example:
Reply from 1.1.1.1: bytes = 100 time = 4 ms
If you need to halt a ping operation, press
Ping commands are available in all areas of the Secure Router OS.

Show

View information about, or the current status of, an interface or feature.
Table 1-3 is a list of show commands available in the router's basic mode
context. For a more comprehensive list of show commands, see "Show" on
page 1-51.
Table 1-3. Basic Mode Context show Commands
.
Ctrl+C
Result
shows the ARP table, which includes interfaces' IP and
MAC addresses
reports whether the SROS.BIZ and startup-config in
internal flash and compact flash are synchronized
displays clock information such as the time, date, and time
source
shows demand routing parameters and statistics
shows the dynamic DNS hostname and registered IP
address
displays the events log
gives information on Frame Relay fragmentation, LMI
status polls, permanent virtual connections (PVCs), and
multilinks
shows status reports for router interfaces; you can also
specify a particular interface
displays configured ACLs and the number of packets the
router has matched to each entry
lists interfaces with their assigned IP addresses and
network masks, the MTU for each interface, and whether
fast caching is enabled on the interface
Overview
Software Overview
1-41