Configuring A Dhcp Server For A Network - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Configurations
other configurations
LAN 1
192.168.32.0 /19
LAN 2
192.168.64.0 /19
Figure 13-8. Example DHCP Network

Configuring a DHCP Server for a Network

If you so choose, you can print and fill out Table 13-2 and refer to it while
configuring the DHCP server on your router.
Figure 13-8 illustrates a simplified example of a router acting as a DHCP server
for two local networks.
1. Move to the global configuration mode context and exclude all static
address on DHCP subnets.
Syntax: ip dhcp-server excluded <A.B.C.D>
You can also exclude a range of addresses.
Syntax: ip dhcp-server excluded <first A.B.C.D> <last A.B.C.D>
2. If you are configuring DHCP for a range of subnets, create a parent DHCP
server pool from the global configuration mode context. Otherwise, move
to step 5.
Syntax: ip dhcp-server pool <parent poolname>
Dynamic Host Configuration Protocol (DHCP)
Parameters
lease in days, hours, and
minutes
domain name
timezone offset
.1
Router
.1
Quick Start
Your Setting
13-35