Configuring A Password For Ftp Access - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Using the Web Browser Interface for Basic Configuration Tasks
Configuring Passwords to Control Management Access to the Router
14-34
3. Select the Use Local User List option if you want to use the usernames
and passwords configured in this list for access to the router's Web server.
(This is the default setting.)
4. If you want to use a RADIUS or TACACS+ server to control access to the
Web browser, then you must enable the AAA subsystem. See "Using the
AAA Subsystem to Control Management Access" on page 14-35 for
instructions on configuring these options.
5. Click Apply.

Configuring a Password for FTP Access

To configure a password for FTP access, complete these steps:
1. Select Passwords in the navigation bar and scroll to the bottom of the
Add/Modify/Delete Users window.
2. Select the FTP tab.
Figure 14-26. Configuring Passwords for FTP Access