Configure Hdlc As The Data Link Layer Protocol - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Using the Web Browser Interface for Basic Configuration Tasks
Configuring the Data Link Layer Protocol for E1, T1, and Serial Interfaces
14-74
Figure 14-52. Statistics for Frame Relay Interface

Configure HDLC as the Data Link Layer Protocol

The following steps explain the initial configuration of HDLC as the Data Link
Layer protocol. It is assumed that you have configured the Physical Layer—
the E1, T1, or serial interface—and you have selected HDLC as the Data Link
Layer protocol. As a result, the HDLC Configuration window is displayed.