Event Indication; Sensor Input Select; Relay Output - Speco DVRM42 User Manual

4.4.4

Event indication

At the EVENT menu, move the cursor to the EVENT INDICATION using
Select "ON‟ or "OFF" using the
4.4.5

Sensor Input Select

At the EVENT menu, move the cursor to the SENSOR INPUT SELECT using the
Press the ENTER button when the cursor is on the SENSOR INPUT.
Select the desired channel using the
Select the type of sensor which is connected with DVR using the
To exit this SENSOR INPUT menu, press the ESC button.
Select the right sensor type according to the type of installed sensor with the unit.
NORMAL OPEN: The sensor is open in normal times.
NORMAL CLOSE: The sensor is closed in normal times.
NOT INSTALLED: No sensors are connected to the DVR unit
4.4.6

Relay Output

At the EVENT menu, move the cursor to the "RELAY OUTPUT" using the
Press the ENTER button when the cursor is on the "RELAY OUTPUT".
Move the cursor using the
buttons to set the event indication.
▲,▼
buttons.
▲,▼
buttons and set up the value using the
▲,▼
button.
▲,▼
button.
24
buttons.
▲,▼
buttons.
buttons.