Softkey Function - Garmin Cirrus Perspective SR20 Pilot's Manual

SYSTEM OVERVIEW

SOFTKEY FUNCTION

The softkeys are located along the bottoms of the displays. The softkeys shown depend on the softkey level
or page being displayed. The bezel keys below the softkeys can be used to select the appropriate softkey. When
a softkey is selected, its color changes to black text on gray background and remains this way until it is turned
off, at which time it reverts to white text on black background. When a softkey function is disabled, the softkey
label is subdued (dimmed).
Softkeys revert to the previous level after 45 seconds of inactivity.
Bezel-Mounted
Softkeys (Press)
In the following descriptions, top level softkeys are denoted with bullets.
PFD SOFTKEYS
The CDI , IDENT , TMR/REF , NRST, and ALERTS softkeys undergo a momentary change to black text on
gray background and automatically switch back to white text on black background when selected.
The PFD softkeys provide control over flight management functions, including GPS, NAV, terrain, traffic,
and weather data (optional). Each softkey sublevel has a BACK Softkey which can be selected to return to
the previous level. The ALERTS Softkey is visible at all softkey levels (label changes if messages are issued).
INSET
INSET
OFF DCLTR
DCLTR-1
DCLTR-2
DCLTR-3
Cirrus Perspective
16
Softkey
On
Figure 1-7 Softkeys (Second-Level PFD Configuration)
SENSOR PFD OBS CDI
Press the CDI Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
Figure 1-8 Top Level PFD Softkeys
WX LGND TRAFFIC TOPO TERRAIN
TRFC-1
TRFC-2
by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
(optional)
DME XPDR IDENT TMR/REF
(optional) (optional)
PRECIP DL LTNG
(optional) (optional)
or: or:
STRMSCP NEXRAD XM LTNG METAR
Press the OFF or BACK Softkey
to return to the top-level softkeys.
Softkey Names
(Displayed)
NRST ALERTS
BACK ALERTS
190-00820-08 Rev. A