Garmin Cirrus Perspective SR20 Pilot's Manual page 521

When a chart is not available by pressing the SHW CHRT Softkey or selecting a Page Menu Option, charts
may be obtained for other airports from the WPT Pages or Flight Plan Pages.
If a chart is available for the destination airport, or the airport selected in the active flight plan, the chart
appears on the screen. When no flight plan is active, or when not flying to a direct-to destination, pressing the
SHW CHRT Softkey displays the chart for the nearest airport, if available.
The chart shown is the one associated with the WPT – Airport Information page. Usually this is the airport
runway diagram. Where no runway diagram exists, but Take Off Minimums or Alternate Minimums are
available, that page appears. If Airport Information pages are unavailable, the Approach Chart for the airport
is shown.
Selecting a chart:
1) While viewing the Navigation Map Page, Flight Plan Page, or Nearest Airports Page, press the SHW CHRT
Softkey. The airport diagram or approach chart is displayed on the Airport Information Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to select either the Airport Identifier Box or the Approach Box. (Press the APR Softkey
if the Approach Box is not currently shown).
4) Turn the small and large FMS Knob to enter the desired airport identifier.
5) Press the ENT Key to complete the airport selection.
6) Turn the large FMS Knob to select the Approach Box.
7) Turn the small FMS Knob to show the approach chart selection choices.
8) Turn either FMS Knob to scroll through the available charts.
9) Press the ENT Key to complete the chart selection.
190-00820-08 Rev. A
Figure 8-29 Approach Information Page, Chart Selection
Cirrus Perspective by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
ADDITIONAL FEATURES
Chart Scale
Select Desired
Approach Chart
From Menu
Scroll Through
Chart With
the Joystick
507