Garmin Cirrus Perspective SR20 Pilot's Manual page 249

DELETING FLIGHT PLAN ITEMS
Individual waypoints, entire airways, and entire procedures can be deleted from a flight plan. Some waypoints
in the final approach segment (such as the FAF or MAP) can not be deleted individually. Attempting to delete
a waypoint that is not allowed results in a window displaying 'Invalid flight plan modification.'
Deleting an individual waypoint from the active flight plan:
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).
2) Press the FMS Knob to activate the cursor (not required on the PFD) and turn the large FMS Knob to highlight
the waypoint to be deleted.
Or :
Use the Joystick to place the Quick Select Box on the waypoint to be deleted (MFD only).
3) Press the CLR Key. The 'Remove XXXXX?' window is displayed.
4) With 'OK' highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight 'CANCEL' and
press the ENT Key.
5) Press the FMS Knob to remove the flashing cursor, if required.
Deleting an entire airway from the active flight plan:
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).
2) Press the FMS Knob to activate the cursor (not required on the PFD) and turn the large FMS Knob to highlight
the white header of the airway to be deleted.
Or :
Use the Joystick to place the Quick Select Box on the white header of the airway to be deleted (MFD only).
3) Press the CLR Key. The 'Remove <airway name>?' window is displayed.
4) With 'OK' highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight 'CANCEL' and
press the ENT Key.
5) Press the FMS Knob to remove the flashing cursor, if required.
Deleting an entire procedure from the active flight plan:
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).
2) Press the FMS Knob to activate the cursor (not required on the PFD) and turn the large FMS Knob to highlight
the white header of the procedure to be deleted.
Or :
Use the Joystick to place the Quick Select Box on the white header of the procedure to be deleted (MFD only).
3) Press the CLR Key. The 'Remove <procedure name> from flight plan?' window is displayed.
4) With 'OK' highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight 'CANCEL' and
press the ENT Key.
5) Press the FMS Knob to remove the flashing cursor, if required.
190-00820-08 Rev. A
Cirrus Perspective by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
FLIGHT MANAGEMENT
235