Garmin Cirrus Perspective SR20 Pilot's Manual page 90

FLIGHT INSTRUMENTS
Enabling/disabling OBS Mode while navigating a GPS flight plan:
1) Press the OBS Softkey to select OBS Mode.
2) Turn a CRS Knob to select the desired course to/from the waypoint. Press a CRS Knob to synchronize the
Selected Course with the bearing to the next waypoint.
3) Press the OBS Softkey again to return to automatic waypoint sequencing.
As the aircraft crosses the missed approach point (MAP), automatic approach waypoint sequencing is
suspended. SUSP appears on the HSI at the lower right of the aircraft symbol. The OBS Softkey label
changes to indicate the suspension is active as shown in Figure 2-28. Pressing the SUSP Softkey, deactivates
the suspension and resumes automatic sequencing of approach waypoints.
Cirrus Perspective
76
SUSP
Softkey
Figure 2-28 Suspending Automatic Waypoint Sequencing
by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
SUSP
Annunciation
190-00820-08 Rev. A