Garmin Cirrus Perspective SR20 Pilot's Manual page 175

• The 'time out' time (configurable on the Map Setup Page for the Map Group) determines how long auto
zoom is overridden by a manual adjustment of the range knob. At the expiration of this time, the auto
zoom range is restored. Setting the 'time out' value to zero causes the manual override to never time out.
• When the maximum 'look forward' time is set to zero, the upper limit becomes the maximum range available
(2000 nm).
• When the minimum 'look forward' time is set to zero, the lower limit becomes 1.5 nm.
Off, MFD Only, PFD Only, All On
Configuring automatic zoom:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'AUTO ZOOM' field.
6) Select 'Off', 'MFD Only', 'PFD Only', or 'ALL On'.
7) Press the ENT Key to accept the selected option. The flashing cursor highlights the 'MAX LOOK FWD' field.
Times are from zero to 999 minutes.
8) Use the FMS Knobs to set the time. Press the ENT Key.
9) Repeat step 8 for 'MIN LOOK FWD' (zero to 99 minutes) and 'TIME OUT' (zero to 99 minutes).
10) Press the FMS Knob to return to the Navigation Map Page.
190-00820-08 Rev. A
Auto Zoom:
Manual Range Override
Expiration Time
Figure 5-7 Map Setup Menu Window - Map Group, Auto Zoom
Cirrus Perspective by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
FLIGHT MANAGEMENT
Maximum Look Forward Time
Minimum Look Forward Time
161