Garmin Cirrus Perspective SR20 Pilot's Manual page 60

SYSTEM OVERVIEW
PILOT PROFILES
System settings may be saved under a pilot profile. When the system is powered on, the last selected pilot
profile is shown on the MFD Power-up Screen (Figure 1-18). The system can store up to 25 profiles; the
currently active profile, the number of profiles used, and the number of profiles available are shown at the top
of the System Setup Page in the box labeled 'Pilot Profile'. From here, pilot profiles may be created, selected,
renamed, or deleted. Pilot profiles may also be exported from the system to an SD card, or imported from an
SD card into the system.
Creating a profile:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight 'CREATE' in the Pilot Profile Box.
4) Press the ENT Key. A 'Create Profile' window is displayed.
5) Use the FMS Knob to enter a profile name up to 16 characters long and press the ENT Key. Pilot profile names
cannot begin with a blank as the first letter.
6) In the next field, use the small FMS Knob to select the desired settings upon which to base the new profile.
Profiles can be created based on Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
7) Press the ENT Key.
8) With 'CREATE' highlighted, press the ENT Key to create the profile
Or :
Cirrus Perspective
46
Figure 1-38 Pilot Profiles
(AUX - System Setup Page)
by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
190-00820-08 Rev. A