SECTION 2 INSTALLATION CONSIDERATIONS Av. Kit Install. Manual 190-00067-62 Rev. E Page 8...
Page 9
Av. Kit Install. Manual 190-00067-62 Rev. E Page 9...
Page 10
Av. Kit Install. Manual 190-00067-62 Rev. E Page 10...
Page 11
SECTION 3 INSTALLATION PROCEDURE ANTENNA AND RACK OPTIONS 010-10040-01 GA 56 ANTENNA KIT, W/O CABLE Includes: 011-00134-00 GA56 ANTENNA SUB-ASSEMBLY 115-00031-00 BACKING PLATE 210-10004-09 NUT, SELF-LOCKING, #8-32 253-00002-00 ANTENNA GASKET 010-10040-02 GA 56 FLANGE MOUNT ANTENNA Includes: 011-00147-00 FLANGE MOUNT GA56 ANTENNA SUB-ASSEMBLY 115-00080-00 NUT PLATE 211-62212-14...
Page 12
28 TO 14V CONVERTER (GNC 250/GNC 250XL ONLY) (Consists of 011-00181-00) 010-10074-00 REMOTE BATTERY PACK (Consists of 011-00182-00) THE FOLLOWING INSTALLATION ACCESSORIES ARE REQUIRED BUT NOT PROVIDED: (GNC 250/GNC 250XL ONLY) COMM ANTENNA: BROAD BAND 50 OHM VERTICALLY POLARIZED WITH COAXIAL CABLE.
CIET-20-HDB HTD-544 HTD-520 Part numbers shown are not maintained by Garmin and consequently are subject to change without notice. When stamped contacts are used special considerations must be made for aircraft power and remote battery (optional) connections, as shown in the following diagram: Av.
Page 40
REMOTE BATTERY PIN ASSIGNMENTS A change was made to the remote battery connectors starting with serial numbers 33050055. Units with lower serial numbers have pin contacts on the battery pack. Units 33050055 and up use socket contacts on the battery and the pin number assignments are different, however the individual contact locations are unchanged.