AUDIO PANEL AND CNS
CONTROL UNIT
The Control Unit is a pedestal-mounted interface allowing data entry, COM and NAV tuning, and transponder
control. Many procedures can be performed using the Control Unit rather than the MFD/PFD display bezel
controls. Annunciators above the FMS, XPDR, NAV, and COM keys are illuminated when their respective
control modes are selected.
COM and NAV radio tuning can be accomplished from the control unit. The appropriate frequency box on
the selected display is outlined by a light blue selection box, which flashes for a few seconds to indicate control
unit activity. Selection of a different display control or radio tuning mode results in cancelation of the previous
radio tuning mode.
8
Cirrus Perspective
112
1
2
3
4
Figure 4-4 Control Unit
Figure 4-5 Frequency Tuning with the Control Unit
by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
5
6
7
12
11
Tuning Selection
9
10
Box
190-00820-08 Rev. A