Garmin Cirrus Perspective SR20 Pilot's Manual page 468

AUTOMATIC FLIGHT CONTROL SYSTEM
HEADING SELECT MODE (HDG)
Heading Select Mode is activated by pressing the HDG Key. Heading Select Mode acquires and maintains
the Selected Heading. The Selected Heading is shown by a light blue bug on the HSI and in the box to the
upper left of the HSI.
c S
hAnging the
Pressing the HDG Knob synchronizes the Selected Heading to the current heading.
NOTE:
The Selected Heading is adjusted using the HDG Knob. Turns are commanded in the same direction as
Selected Heading Bug movement, even if the bug is turned more than 180° from the present heading (e.g.,
a 270° turn to the right). However, Selected Heading changes of more than 330° at a time result in turn
reversals.
Selected
Heading
Cirrus Perspective
454
h
elected eAding
Heading Select
Mode Active
Selected
Heading
Bug
Figure 7-21 Heading Select Mode
by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
Pitch Hold
Mode Active
Command Bars Track
Selected Heading
190-00820-08 Rev. A