Or :
1) Select the Weather Information Page.
a) Turn the large FMS Knob to select the Waypoint Page Group.
b) Select the WX Softkey to select the Weather Information Page.
2) Press the FMS Knob to display the cursor.
3) Use the FMS Knob to enter the desired airport and press the ENT Key.
4) Use the FMS Knob or the ENT Key to scroll through the METAR and TAF text. Note that the METAR text must
be completely scrolled through before scrolling through the TAF text.
METAR Symbol
Raw METAR text is also accessible while panning the map cursor over a METAR flag on any map page on
which a METAR is displayed. The METAR text is shown in a box near the METAR flag.
In addition, METAR flags and their associated text are displayed on the Active Flight Plan Page on the
MFD. METAR flags appears next to waypoints in the flight plan with an associated METAR. A solid light
blue METAR flag indicates the METAR observations are available for a specific waypoint; a hollow light blue
METAR flag indicates an off-route METAR near the waypoint is available.
Displaying raw METAR text on the Active Flight Plan Page:
1) Select the Active Flight Plan Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired waypoint. The METAR text will appear in the 'SELECTED
WAYPOINT WEATHER' window below.
4) When finished, press the FMS Knob to remove the cursor or press the FPL Key to exit the Active Flight Plan
Page.
190-00820-08 Rev. A
Figure 6-73 METAR and TAF Text on the Weather Information Page
Cirrus Perspective
by Garmin – Pilot's Guide for the SR20/SR22SR22T
™
HAZARD AVOIDANCE
METAR Text for the
Selected Airport
TAF Text for the
Selected Airport
357