Destination Airport Information - Garmin Cirrus Perspective SR20 Pilot's Manual

FLIGHT MANAGEMENT

DESTINATION AIRPORT INFORMATION

The destination airport for which the information is displayed is determined as follows.
• The destination airport is the last airport in the active flight plan if:
- No arrival or approach is loaded, or
- An arrival waypoint is part of the active leg and no approach is loaded, or
- The active leg is past the MAP
• The destination airport is the airport prior to the procedure(s) in the active flight plan if:
- An arrival and/or approach is loaded and neither are active
• The destination airport is the airport associated with the approach if:
- An arrival waypoint is part of the active leg and an approach is loaded, or
- The approach is active
• The destination airport is the Direct-to waypoint if:
- The Direct-to waypoint is not in the active flight plan and is an airport
If none of these conditions are met, then the destination airport is undefined and the destination information
fields are shown as dashes.
Cirrus Perspective
184
Valid Destination Airport
Identifier
Figure 5-31 Destination Airport Information
by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
Airport Fuel Remaining
at Airport
Enroute Bearing
Distance to Airport
Invalid Destination Airport
Estimated
Time Enroute
190-00820-08 Rev. A