Available Parameters; Parameters That Can Be Specified From The Administrator Management Screen; List Of Required Network Settings - Konica Minolta bizhub 362 User Manual

7
7 Specifying management settings
7.1

Available parameters

Parameters that can be specified from the Administrator Management
screen
The following Administrator Management parameters are related to the infor-
mation in this manual.
Parameter
IP Relay Settings
Software SW
Reminder
If the [Utility/Counter] key was pressed to register items and specify set-
tings, be sure to press the [Reset] key in the control panel after returning
to the initial screen.

List of required network settings

The network settings should be specified as shown below in order for the op-
erations described in this manual to be used.
For details on network settings other than those available on the IP Relay
Settings screen, refer to the User's Guide [Network Scanner Operations].
o : Required
/ : Available
+ : Necessary depending on environment
− : Unavailable with the operation
!
Detail
When using IP address faxing and IP Relay operations, do not specify a
setting for "Self-Domain Name".
7-2
Specifying management settings
Description
When sending a fax as an IP relay, specify the IP address
and domain name of the relay machines. In addition, the
main relay stations to be used can be selected.
Use to specify the machine settings.
362/350/282/250/222/200