Available Parameters; Administrator Management 1; Administrator Management 2 - Konica Minolta bizhub 350 Operations

Specifying management settings
0.1

Available parameters

The following Administrator Management parameters are related to the
mation in this manual.

Administrator Management 1

Item
Initial Setting
TX Settings
RX Settings
Report Settings
Document
Management

Administrator Management 2

Item
Network Settings
Software SW
Ping
SSL/TLS
TSI
Registration
TX Document
RX Document Port
All Other
Documents
Description
Specifies the required settings for using this machine ove
work. For details, refer to Chapter 2, "Setup" on page 3-
Specifies function status settings.
Checks whether this machine is connected to a network
details, refer to Chapter 2, "Setup" on page 3-3.
When SSL/TLS is enabled, the communication between t
chine and the client computer can be encrypted. Specifi
creation, deletion, or encryption of certificates.
Description
Prints the entered text such as the nam
number, and address at the top of the
page when sending an Internet fax.
Registers this transmission source nam
Specifies the default settings for transm
Specifies the time and day of the week t
when receiving an Internet fax.
Specifies the output conditions of the r
reports and communication control rep
When sending documents from this ma
they can simultaneously be forwarded
addresses specified by the administrat
Specifies the forwarding addresses.
Specifies the processing and forwardin
documents received over a network.
Specifies the processing and forwardin
documents received in other ways than
network.