If Transmission Could Not Be Completed; Viewing A Transmission Report - Konica Minolta BIZHUB 350 User Manual

Scan to E-Mail
4.5

If transmission could not be completed

If the transmission could not be completed correctly, a transmission report
is printed.
!
Detail
You can change the transmission report printing conditions. For details,
refer to "Specifying the transmission report printing conditions (Report
Settings)" on page 10-17.

Viewing a transmission report

4
No. Item
1 Report output date and time
2 Transmission source information
(TSI)
3 Transmission information
bizhub 350/250 (Phase 2.5)
2
Description
Shows the date and time that the report was print-
ed.
Shows the registered transmission source name.
Prints the document number, the duration of the
transmission, and the transmission mode.
4
1
3
5
4-29