Stapling Copies (Staple Settings) - Konica Minolta BIZHUB 750 User Manual

4

Stapling copies (Staple settings)

!
Detail
100 to 314 mm (width) e 198 to 458 mm (length)
In order for the copies to be stapled, all of the following conditions must
be met.
There are four Foolscap sizes: 8-1/4 e 13" w, 8-1/8" e 13-1/4" w, 8-1/2"
e 13" w and 8" e 13" w. Any one of these sizes can be selected. For
details, contact the service representative.
If the "Mixed Original" setting is selected, all copies must have the same
paper width.
If a Staple setting is selected, the "Sort" setting is automatically selected.
A Staple setting cannot be used together with the "Offset" setting.
If a Staple setting is to be selected, select the orientation in which the
original is positioned and the binding direction, otherwise the copies may
not be stapled as desired.
For details on specifying the original orientation, refer to "Selecting the
original orientation (Original Direction settings)" on page 4-24.
4-76
Basic copy operations
bizhub 750/600 (Phase 2)