Scanning The Next Original To Be Copied While A Copy Job Is Being Printed (Next Job Reservation); To Reserve A Copy Job - Konica Minolta BIZHUB 750 User Manual

Basic copy operations
4.14 Scanning the next original to be copied while a copy
job is being printed (Next Job Reservation)
The settings for the next copy job can be specified and the original can be
scanned while a copy operation is being performed so that it can be printed
once the current copy operation is finished.

To reserve a copy job

0 Up to 51 copy jobs, including the current copy job, can be reserved.
0 A copy job can be reserved after scanning of the positioned original is
finished. A copy job cannot be reserved while an original is being
scanned.
0 If Utility Setting parameter "Copy Operating Screen" is set to "ON",
[Program Next Job] appears. Touch [Program Next Job], and then
specify the copy settings for the next copy job.
For details on specifying the "Copy Operating Screen" parameter, refer
to "Display setting" on page 13-30.
0 For details on positioning the original, refer to "Positioning the original"
on page 4-9.
0 To cancel a reserved copy job, display the Basic screen for the reserved
copy job, and then press the [Stop] key. For details, refer to "Performing
operations on jobs" on page 12-7.
1
Press the [Start] key to begin scanning and outputting the current copy
job.
The Basic screen for reserving a copy job appears.
bizhub 750/600 (Phase 2)
4
4-99