Stapling Copies (Staple Settings) - Konica Minolta BIZHUB C250 User Manual

Basic copy operations

Stapling copies (Staple settings)

!
Detail
In order for the copies to be stapled, all of the following conditions must
be met.
The paper width must be between 182 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
If the "Mixed Original" setting is selected, all copies must have the same
paper width.
If a Staple setting is selected, the "Sort" setting is automatically selected.
A Staple setting cannot be used together with the "Offset" setting.
If a Staple setting is to be selected, select the orientation in which the
document is positioned and the orientation of the page to be stapled,
otherwise the copies may not be stapled as desired.
For details on specifying the document orientation, refer to "Selecting the
document orientation (Original Direction settings)" on page 3-21.
When Finisher FS-603 is installed
Paper Weight
2
60 g/m to
2
90 g/m
Number of Bound
Pages
A4 w or 2 sheets
smaller
3 to 5 sheets
6 to 10 sheets
11 to 20 sheets
21 to 30 sheets
31 to 50 sheets
C250
Paper Size
A4 w/v, B5 w/v
A3 w, B4 w
Maximum Number of Sets
One place
towards the
back
100 sets
80 sets
60 sets
30 sets
30 sets
30 sets/1,000
sheets
Loading Capacity (detected with ei-
ther measurement)
1,000 sheets 150 mm
500 sheets 75 mm
One place Two places
towards the
front
40 sets 40 sets
40 sets 40 sets
40 sets 40 sets
30 sets 30 sets
30 sets 30 sets
30 sets/1,000 30 sets/1,000
sheets sheets
3
3-69