Konica Minolta BIZHUB 750 User Manual page 441

Application functions
– When using the keypad to specify the settings, press the [C] (clear)
key, and then type in the setting.
– If a value outside the allowable range is specified, the message
"Input Error" appears. If "Input Error" appeared or if the adjustment
value was incorrectly entered, touch [No Adj.] or press the [C] (clear)
key, and then specify the correct value.
What are the limits on the adjustment amount?
?
% The print position can be finely adjusted in 0.1 mm increments.
Can no adjustments be made?
?
% To make no left/right or up/down adjustments, touch [No Adj.].
5
Touch [OK].
The Print Position screen appears again.
6
Touch [OK] three times.
7
If necessary, specify any other copy settings.
8
Using the keypad, type in the desired number of copies.
9
Press the [Start] key.
bizhub 750/600 (Phase 2)
9
9-97