Konica Minolta BIZHUB 750 User Manual page 601

Utility
9
Touch [Close].
The 2 Position Staple screen appears again.
10
Check the stapling positions in the sample copy.
11
If the desire print results are not achieved, change the adjustment
value.
– Touch [+] and [-] to adjust the distance (between 128 and 160 mm)
between the staples.
12
Repeat steps 6 through 11 until the desired print results are achieved.
13
Touch [OK].
– To cancel changes to the settings, touch [Cancel].
bizhub 750/600 (Phase 2)
13
13-93