Konica Minolta BIZHUB 750 User Manual page 632

13
Changed settings
For increased security, the following settings are also set when "Enhanced
Security Mode" is set to "ON".
Administrator Setting commands
System Setting—Restrict User Access—Restrict Access to
Job Settings—Registering and Changing Address
User Authentication/Account Track—General Settings—
Public User Access
User Authentication/Account Track—User Authentication
Setting—Administrative Setting—User Name List
User Authentication/Account Track—Print Without Authen-
tication
Security Setting—User Box Admin. Setting
Security Setting—Security Details—Password Rules
Security Setting—Security Details—Prohibit Functions
When Auth. Error
Security Setting—Security Details—Secure Document Ac-
cess Method
Security Setting—HDD Setting—Temporary Data Over-
write Setting
Note
The number of times for checking for "Prohibit Functions When Auth.
Error" can be changed to between 1 and 3.
A changed setting cannot be changed when "Enhanced Security Mode"
is set to "OFF".
When "Password Rules" is set to "ON", a password that does not meet
the password rules is considered a failed attempt during authentication.
For details on the password rules, refer to "Password rules" on
page 13-120.
For details on the changed network settings, refer to the User manual
[Network Scanner Operations].
13-124
Changed settings
Set to "Restrict".
Set to "Restrict".
Set to "OFF".
Set to "Restrict".
Set to "Restrict".
Set to "ON".
Set to "Mode 2" and three times
or less for checking.
Set to "Mode 2".
Set to "Mode 2".
bizhub 750/600 (Phase 2)
Utility