4
3
Press the [Start] key.
–
Repeat this step until all pages of the original have been scanned.
–
The amount of memory available can be checked beside "Memory"
in the upper-right corner of the Basic screen.
–
To change the scanning settings, touch [Change Setting]. For
details on changing the scanning settings, refer to "To change scan
settings for each document" on page 4-32.
–
To delete the image data, press the [Stop] key, and then delete the
job. For details, refer to "Stopping scanning/printing" on
page 4-101.
After the original is scanned, the message "Set the next original and
press [Start]." appears.
4
After all original pages have been scanned, touch [Finish].
5
Press the [Start] key.
4-14
Basic copy operations
bizhub 750/600 (Phase 2)