Specifying Original Settings; Copying Original Of Mixed Sizes ("Mixed Original" Setting) - Konica Minolta BIZHUB 750 User Manual

4
4.4

Specifying original settings

The following procedure describes how to specify the type of original to be
copied.

Copying original of mixed sizes ("Mixed Original" setting)

Original of different sizes can be loaded together into the ADF to be fed and
scanned one by one automatically.
The possible combinations of original sizes differ depending on the widest
original loaded (position of the adjustable original guides of the ADF).
0 Do not load more than 100 sheets or so many sheets that the top of the
stack is higher than the , mark, otherwise an original misfeed or damage
to the original or machine may occur. However, an original that exceeds
100 pages can be scanned in separate batches. For details, refer to
"Scanning the original in separate batches ("Separate Scan" setting)" on
page 4-13.
0 If the original is not loaded correctly, the original may not be fed in
straight or an original misfeed or damage to the original may occur.
1
Arrange the original pages so that
the side to be copied (first page)
faces up, as shown in the illustration.
– For details on the original sizes
that can be mixed in the ADF,
refer to "Original that can be
positioned into the ADF" on
page 8-39.
2
Position the original face up in the
ADF.
Slide the adjustable paper guides
against the edges of the original.
– Load the document pages into
the ADF so that the top of the
pages is toward the back or the
left side of the machine.
4-18
Basic copy operations
bizhub 750/600 (Phase 2)