4
To change scan settings for each document
When copying using the "Separate Scan" setting or when multi-page
documents are placed on the original glass, the scan settings can be
changed for each document. The following procedure describes how to
change the settings when the "Separate Scan" setting is used.
1
Position the document to be copied.
2
In the Basic screen, touch [Separate Scan].
3
Press the [Start] key.
Scanning begins.
4
Touch [Change Setting].
A screen appears, allowing you to change the settings.
4-32
Basic copy operations
bizhub 750/600 (Phase 2)