Application functions
5
Touch [Image Repeat].
The Image Repeat screen appears.
6
Select the layout method.
–
To cancel changes to the settings, touch [Cancel].
–
To cancel the "Image Repeat" function, touch [OFF].
7
Touch [Auto Detect].
–
If the size does not appear or if you wish to specify the scanning
area, touch [Set Range], and then specify the size of the scanning
area.
–
For details on specifying a size, refer to "To repeat the specified
area ("Set Range")" on page 9-52.
The scanning area is detected, and the size appears under "Scan
Range Original Size Setting".
bizhub 750/600 (Phase 2)
9
9-57