Konica Minolta BIZHUB 750 User Manual page 649

Appendix
Function combination code keys
If the cover sheet is thick paper and the paper for the body text is plain paper while using
the "Cover Mode" function, a Staple setting can also be selected.
In any other case, the settings cannot be combined, the setting specified first is given pri-
ority, and a warning message appears.
Automatically selected when settings for the "Book Copy" function are selected.
If the "Auto Booklet ON When Fold & Staple" parameter is set to "Auto Select Booklet",
the setting specified first is given priority and a warning message appears.
The settings can be combined if the parameter is set to "OFF".
A setting under "Front Cover" can be combined with the "Booklet" function or "Half Fold"
or "Fold & Staple" settings.
A setting under "Back Cover" cannot be combined with the "Booklet" function or "Half
Fold" or "Fold & Staple" settings. The "Booklet" function or "Half Fold" or "Fold & Staple"
settings are given priority.
If LU-401 is installed, a warning message appears, instructing that center folding or center
binding be specified.
If single-sided copying is first selected, then combined with the "Fold & Staple" or "Half
Fold" setting or the "Center" Staple setting, the setting specified first is given priority if the
"Auto Booklet ON When Fold & Staple" parameter is set to "Auto Select Booklet".
The settings can be combined if the parameter is set to "OFF".
Selecting the post inserter PI-501 with the "Cover Mode" or "Insert Sheet" function can-
not be combined with the "Face Up" setting. Instead, a warning message appears.
If the "Auto Booklet ON When Fold & Staple" parameter is set to "Auto Select Booklet",
the setting specified later is given priority.
The settings can be combined if the parameter is set to "OFF".
When "Auto Booklet ON When Fold & Staple" is set to "Auto Select Booklet" and "Auto
Zoom for Combine/Booklet" is set to "Auto Display Zoom Ratio", the setting selected last
is given priority.
In all other cases, the settings can be combined.
If single-sided copying is first selected, then combined with the "Fold & Staple" or "Half
Fold" setting or the "Center" Staple setting, the setting specified last is given priority if the
"Auto Booklet ON When Fold & Staple" parameter is set to "Auto Select Booklet".
The settings can be combined if the parameter is set to "OFF".
If the "Auto Booklet ON When Fold & Staple" parameter is set to "Auto Select Booklet",
the settings cannot be combined.
If paper is fed from a tray of the main unit, the setting specified first is given priority, and
a warning message appears.
If paper is fed from the post inserter PI-501, the settings cannot be used together.
If a document is being scanned, the setting specified first is given priority, and a warning
message appears.
When scanning of the document is finished, the settings can be used together.
bizhub 750/600 (Phase 2)
14
14-15