Stapling Copies (Staple Settings) - Konica Minolta bizhub 361 User Manual

Basic copy operations
2.11.4

Stapling copies (Staple settings)

Copies can be fed out stapled either in the corner or at two places.
!
Detail
In order for the copies to be stapled, all of the following conditions must be met.
The paper width must be between 7-3/16 inch and 11-11/16 inch.
The paper length must be between 5-1/2 inch and 17 inch.
If the "Mixed Original" setting is selected, all copies must have the same paper width.
Reminder
Copies can be fed out stapled either in the corner or at two places only when the finisher is installed.
Copies can be fed out stapled either in the corner or at two places.
Finisher FS-522
Tray
Finishing tray 1
Finishing tray 2
Optional finishing tray
Number of Bound Pages: 50 sheets of
Finisher FS-523 (Primary output tray)
Paper Weight
16 lb to 24 lb
Number of Bound Pages: 50 sheets of
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
501/421/361
Paper Weight
15 lb to 24 lb
15 lb to 24 lb
15 lb to 24 lb
24 lb paper
Paper Size Loading Capacity
11 × 17 w to 8-1/2 × 11 w or smaller: When the stack is 14-3/4 inch high or
8-1/2 × 11 w/v
contains 3,000 sheets.
8-1/2 × 14 w or larger: When the stack is 7-1/2 inch high or con-
tains 1,500 sheets.
24 lb paper
Paper Size Loading Capacity
11 × 17 w to
When the stack is 1-1/4 inch high
5-1/2 × 8-1/2 v
or contains 200 sheets or 20 sets
11 × 17 w to
8-1/2 × 11w or smaller: 5-1/4 inch
5-1/2 × 8-1/2 v
high or contains 1,000 sheets or
100 sets
8-1/2 × 14w or larger: When the
stack is 2-1/2 inch high or contains
500 sheets or 50 sets
11 × 17 w to
When the stack is 1 inch high or
5-1/2 × 8-1/2 v
contains 200 sheets or 20 sets
2
2-58