Konica Minolta BIZHUB 750 User Manual page 78

3
No. Part name
8 [Reset] key
9 [Interrupt] key
10 [Stop] key
11 [Start] key
12 Main Power indicator
13 Data indicator
14 [Proof Copy] key
15 Keypad
16 [C] (clear) key
17 [Mode Check] key
18 [Utility/Counter] key
19 [Mode Memory] key
20 Contrast dial
21 [Enlarge Display] key
22 [Accessibility] key
23 [Help] key
3-18
Before making copies
Description
Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
Press to enter Interrupt mode.
While the machine is in Interrupt mode, the indica-
tor on the [Interrupt] key lights up in green and the
message "Now in Interrupt mode." appears on the
touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
Press the [Stop] key during copying to stop the
copy operation.
Press to start copying. When this machine is ready
to begin copying, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, copying cannot begin.
Press this key to continue a stopped job. (See
p. 12-3.)
Lights up in green when the machine is turned on
Flashes in green while a print job is being received
Lights up in green while a print job is queued to be
printed or while it is printing.
Press to print a single sample copy to be checked
before printing a large number of copies. (See
p. 5-7.)
Use to type in various values, such as the number
of copies to be produced and the zoom ratio.
Press to erase a value (such as the number of cop-
ies, a zoom ratio, or a size) entered using the key-
pad or touch panel.
Press to display screens showing the specified set-
tings.
Press to display the Utility screen and allow the me-
ter count to be checked.
Press to register the desired copy settings as a pro-
gram or to recall a registered copy program. (See
p. 5-17.)
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
Press to display the screen for specifying user ac-
cessibility functions.
Press to display the Main Help Menu screen, where
descriptions of the various functions and details of
operations can be displayed. (See p. 5-20.)
bizhub 750/600 (Phase 2)