Konica Minolta BIZHUB 750 User Manual page 580

13
7
Touch the button for the paper size to be set.
8
Touch [Test Copy].
The Test Copy screen appears.
9
Press the [Start] key.
The sample copy is printed.
10
Touch [Close].
The Punch Vertical Position screen appears again.
11
Check the sample copy for the punch positions and for the center of
the paper.
12
If the desire print results are not achieved, change the adjustment
value.
– If the punch positions are too far above the center of the paper,
touch [+] (between 0.1 mm and 5.0 mm).
13-72 bizhub 750/600 (Phase 2)
Utility