Automatically Canceling The Settings (Automatic Panel Reset) - Konica Minolta BIZHUB 750 User Manual

Hide thumbs Also See for BIZHUB 750:

Table of Contents

Before making copies

The following are cleared when the main power switch and sub power

switch are turned off.

Settings that have not been programmed

Jobs queued to be printed

When turning the main power switch off then on, be sure to wait 10

seconds or longer before turning it on again;

otherwise the machine may not operate properly.

Automatically canceling the settings (Automatic panel reset)

If the [Reset] key is not pressed and no operation is performed for a specified

length of time, settings that have not been programmed, such as the number

of copies, are cleared and return to their default settings.

This is the automatic panel reset operation.

As the factory default, the automatic panel reset operation is performed after

The length of time until the automatic panel reset operation is performed

and whether or not it is performed can be set from the Administrator

mode. For details, refer to "System setting" on page 13-26.

bizhub 750/600 (Phase 2)