To Load Paper (Tray 1 Or 2); Loading Paper Into The Tray 1 Or 2 - Konica Minolta BIZHUB 750 User Manual

3
3.4

Loading paper into the tray 1 or 2

To load paper (tray 1 or 2)

1
Pull out the paper tray for the tray 1 or 2.
2
Raise the paper take-up roller.
3
Load the paper into the tray.
– Load the paper so that it is flush
against the right side of the tray.
4
Fully push in the paper tray.
Reminder
Do not load so much paper that the top of the stack is higher than the ,
mark.
Make sure that the trailing-edge guide is adjusted to fit the size of the
loaded paper.
3-44
Before making copies
bizhub 750/600 (Phase 2)