Konica Minolta BIZHUB 750 User Manual page 234

5
Can the copy program name be corrected?
?
% To change the entered copy program name, touch the button
whose name is to be changed, and then touch [Edit Name].
4
Use the keyboard that appears in the touch panel to type in the name
of the copy program.
– A name of up to 16 characters can be specified for the registered
copy program. (For details, refer to page 14-3.)
5
After typing in the name, touch [OK].
– The copy program can be given the same name as a copy program
that has already been registered.
The Recall Copy Program screen appears again. The copy program is
registered and a button with the entered copy program name appears.
? Can the specified settings for a copy program be checked?
% To check the programmed copy settings, touch the button for the
desired copy program, and then touch [Check Job]. For details,
refer to "Copying with programmed copy settings (Mode Memory)"
on page 5-17.
? How is a job deleted?
% Touch the button for the desired copy program, and then touch
[Del.]. In the screen that appears, requesting confirmation to delete
the copy program, touch [Yes] to delete the selected copy program.
5-14
Additional copy operations
bizhub 750/600 (Phase 2)