Loading Paper Into The Bypass Tray; To Load Paper (Bypass Tray) - Konica Minolta bizhub c450 Copy Operations

Before Making Copies
2.7

Loading Paper into the Bypass Tray

Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into a paper drawer, or if you wish to copy onto thick
paper, postcards, envelopes, overhead projector transparencies or label
sheets.

To load paper (bypass tray)

1
Open the bypass tray.
– When loading large-
sized paper, pull out
the tray extension.
2
With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
3
Slide the lateral guides
to fit the size of paper
being loaded.
C450
2
Tray extenstion
Lateral guides
2-57